How to Choose Netting Clips for Chain Link Fencing

The Smart Guide to Choosing Netting Clips for Chain Link Fencing

Introduction

A chain link fence is only as dependable as the components holding everything together. Posts, mesh and wire might get most of the attention, but small fittings such as netting clips play an important role in keeping the fencing securely attached and properly finished.

If you need to choose netting clips for chain link fencing, compatibility should come before convenience. The clip dimensions, material, fencing system and installation tool all deserve consideration before you start fastening hundreds of clips along a fence line.

Australian manufacturer Supaguard Fencing supplies chain link security fencing and associated components. Its product range includes chain link mesh, wire, gates, pipe, fittings and accessories, making it easier to consider netting clips as part of the complete fencing system rather than an isolated purchase.

The tiny clip suddenly looks a little more important, doesn't it?

TLDR - Quick Guide

When deciding how to choose netting clips for chain link fencing, focus on five things:

• Clip dimensions: Check that the clip specification suits the intended fencing system.
• Mesh compatibility: Match the fastening method to the chain link mesh you're installing.
• Finish: Consider whether the clips suit the fence material and environmental conditions.
• Correct tool: Use compatible netting clip pliers rather than improvising.
• Quantity: Calculate how many clips the project requires and allow for installation requirements.

The goal isn't simply to find a clip that closes. It's to create a consistent fastening system across the fence.

Detailed Breakdown

What Are Netting Clips for Chain Link Fencing?

Netting clips are small fastening components used as part of a chain link fencing installation. Their job is straightforward: secure fencing material where the system requires a clip connection.

That makes them one part of a much larger assembly. A complete Chain Link Fencing system can involve mesh, wire, posts, gates, pipes, fittings and accessories working together.

Supaguard's product catalogue lists 19 x 2.24 mm galvanised netting clips in packs of 500, along with netting clip pliers designed for 19 mm clips.

That pairing illustrates an important lesson: clips shouldn't be selected in isolation.

1. Start With the Clip Dimensions

The first step when you choose netting clips for chain link fencing is checking the actual clip specification.

Don't assume that every box labelled "netting clips" is interchangeable. Check the manufacturer's dimensions and confirm they're appropriate for your fencing configuration.

Supaguard's catalogue specifies its galvanised netting clips as 19 x 2.24 mm.

Before ordering, check:

• Clip size
• Wire diameter
• Pack quantity
• Recommended application
• Compatible installation tool

These details become particularly important on larger jobs. A minor compatibility problem multiplied across an entire perimeter can quickly become an expensive headache.

2. Match the Clips to the Chain Link System

Next, look at the fence as a system rather than a collection of unrelated components.

Chain link mesh can vary in specification and finish, while the complete fence may also require wire, gates, pipe and numerous fittings. Your clips therefore need to make sense alongside the materials you're actually installing.

Before purchasing, establish:

What chain link mesh is being used?

What wire and framework are specified?

Where will the clips be installed?

What clip specification is recommended?

Which installation tool matches those clips?

This is a much safer approach than buying a generic box and hoping for the best.

3. Consider the Clip Finish

Finish matters because fencing spends its life outdoors.

Supaguard specifically lists its 19 x 2.24 mm netting clips as galvanised. When comparing Fencing Accessories, check the stated finish instead of making assumptions based on appearance.

The clip should also be considered alongside the wider fence specification. Mesh, wire, framework and fittings all need to work together as part of a coherent fencing system.

Choosing components this way makes purchasing, installation and future maintenance considerably simpler.

4. Don't Forget the Installation Tool

Buying clips without checking the applicator is an easy mistake.

Supaguard's catalogue pairs its 19 mm clips with green-handle netting clip pliers designed for 19 mm clips. That's a useful reminder that clip selection and tool selection should happen together.

The right tool helps installers make repeatable fastenings efficiently. That's especially useful when a long fence line requires the same operation over and over again.

Before work starts, confirm:

• The pliers accept the selected clip size.
• The tool is in suitable working condition.
• Installers understand how the fastening should be applied.
• Enough clips are available to complete the planned work.

A pair of compatible pliers is a small consideration compared with discovering halfway through a job that the clips and tool don't match.

5. Check the Rest of the Fencing Specification

Netting clips shouldn't compensate for poorly selected fencing components.

Review the mesh, framework and Fencing Wire specification before finalising the accessories order. The objective is to make sure the individual products form a compatible fencing system.

For projects with formal specifications, don't guess. Check the project documentation and confirm the required components with the supplier where necessary.

This becomes even more important on commercial, industrial or security fencing projects where consistency across the installation matters.

6. Calculate Quantity Before Ordering

Running out of clips halfway down a fence line isn't exactly a productivity masterclass.

Once you've established the correct product, estimate how many clips the project will require based on the fence design and specified fastening arrangement.

Supaguard's catalogue lists its galvanised netting clips in 500-piece packs. Knowing the pack size makes it easier to translate your installation requirements into an order quantity.

For larger jobs, consider:

• Total fence length
• Fence height
• Required fastening arrangement
• Number of fence sections
• Gates, corners and other changes in configuration
• A sensible allowance for the realities of installation

The exact quantity should ultimately come from the project's fencing specification rather than a universal clips-per-metre assumption.

7. Buy Clips as Part of the Overall Fence System

One of the simplest ways to reduce compatibility headaches is to source related fencing components with the complete system in mind.

That doesn't mean every component must automatically come from one supplier. It means someone needs to verify that the mesh, wire, clips, framework and fittings actually belong together.

Looking at the complete fencing specification before purchasing small accessories can prevent ordering mistakes, installation delays and unnecessary replacement costs.

If you're uncertain about the appropriate clip or tool, Contact Supaguard Fencing with your fencing specifications before ordering.

Common Mistakes When Choosing Netting Clips

Assuming All Clips Are the Same

They're not. Dimensions and intended applications can differ, so always check the product specification before purchasing.

Buying Clips Before Checking the Tool

Treat clips and pliers as a pair. If your applicator is intended for a particular clip size, verify compatibility before ordering either component.

Ignoring the Wider Fence Specification

A clip is one link in the system. Mesh, wire, framework, fittings and fastening components should be considered together.

Ordering on Guesswork

Large fencing projects can consume plenty of small components. Calculate requirements from the fence design and specified fastening arrangement instead of eyeballing a box and declaring, "That should do."

Key Takeaways

Check dimensions first. When you choose netting clips for chain link fencing, confirm the clip size and wire diameter against the fencing specification.

Think about the complete system. Netting clips need to work with the mesh, wire, framework and other fittings rather than being selected as an isolated accessory.

Consider the finish. Check whether the clip finish is appropriate for the fence specification and intended environment.

Match the clips with the correct tool. Verify that your netting clip pliers are designed for the clip size you're purchasing.

Calculate quantity before installation. Use the fence dimensions and specified fastening arrangement to determine how many clips you'll need.

Don't rely on guesswork. If a specification isn't clear, confirm it with the fencing supplier before placing an order.

Small components deserve attention. Choosing the right netting clips can help make installation more consistent and prevent a tiny piece of hardware from becoming a surprisingly large problem.